The Rotating Pulser creates a pressure wave by pulsing a flat fan-shaped stream of water combined with a 100 degree sweeping discharge of water from the power head.

Inlet: 5/8" or 3/4" hose (use clamp with 3/4" hose)
Outlet: 90 degree, fan shaped, flat stream with 1/2" male pipe thread on rotating outlet
Factory Nozzle: 90 degree, solid stream with 11/16" outlet
Fan-Shaped Outlet size and shape can be modifed musing the ring accessory

Suggestions for use:
Mount under the hood for a flat pulsing wave action across the top of the tank. Add an extension to the rotating outlet and sweep across the bottom of the tank.
Mount on the bottom of the tank to pulse on the bottom and sweep across the top.
Use the adjustment ring accessory to modify the flow of the flat stream. Use various nozzles to modify the flow from the rotating outlet.
Mount horizontally to pulse wave action across the back of coral and remove the nozzle to pulse a straight stream across the side of the tank.
Use a stand to mount in the center of the tank and pulse in one direction while sweeping across in another.